Tripp Lite Cat6a 10G Snagless Molded Slim UTP Ethernet Cable (RJ45 M/M), Black, 4ft. (1.22 m)

The Tripp Lite N261-S04-BK is a Cat6a Slim UTP Ethernet Cable created for network builders who need dependable 10 Gbps performance without the bulk that usually crowds racks and patch panels. At only four feet long, it reaches between equipment on the same shelf or between adjacent racks while staying out of the way.

Tripp Lite trims more than thirty-eight percent of the outer diameter compared with typical Cat6a runs, so air can circulate freely through densely populated cabinets and cable trays. The slimmer jacket also bends easily around corners and through narrow conduits, making installation quicker in tight spaces.

Inside the jacket, 28 AWG stranded copper conductors carry data at full 10-Gigabit speeds and support Power over Ethernet that follows IEEE 802.3af guidelines. Each end terminates in an RJ45 plug with a snagless hood that shields the locking tab from damage as you pull the cable through bundles. Molded strain relief behind the plug guards the conductors from stress during repeated moves or reconfigurations.

Use this cable anywhere you need a neat, high-speed link: patch a top-of-rack switch to a server in a data center, connect a VoIP phone to a wall plate in an open office, or tidy up a home lab where space and airflow matter. Compatibility with both T568A and T568B wiring schemes means it drops into existing networks without special pinouts.

Highlights:

• Outer diameter is about 38 percent slimmer than a standard Cat6a cable, which improves airflow and reduces clutter
• Handles Ethernet traffic up to 10 Gbps for demanding applications such as virtualization and high-definition media
• RJ45 plugs feature a snagless hood that protects the retaining tab during installation
• 28 AWG stranded copper conductors deliver reliable signal integrity and flexible routing
• Length of 4 ft (1.22 m) is ideal for short-distance connections inside racks or between nearby devices
• Meets IEEE 802.3af Power over Ethernet and supports both T568A and T568B wiring standards